Q factor shows how lossy an inductor is at a given frequency, and self-resonant frequency shows where it stops being an inductor. Here is…
A structured way to evaluate a supplier of inductors, chokes and transformers: capability, engineering support, test coverage, traceability and commercial terms.
The transformers, inductors and chokes in a telecom power chain, from the 48 V rectifier to point-of-load converters, and what each must deliver.
Where the heat in a high-frequency transformer comes from: core loss, skin and proximity effects, fringing and leakage, and the design steps that reduce…
A practical route to passing conducted emissions: what the standards ask for, how to run a pre-compliance scan, and which fix suits each part…
Inductors rarely fail without a cause. This guide covers the thermal, magnetic, electrical and mechanical failure mechanisms and the design and sourcing steps that…
A fraction of a millimetre of air in a ferrite core decides how much current an inductor can carry. This guide explains what the…
A five-step checklist for selecting a common mode choke: electrical ratings, impedance, core and winding, thermal and safety fit, and sample verification.
How current transformers and power transformers differ in connection, core flux, design goals and failure modes, including why a CT secondary must stay closed.
The inductors and chokes in a battery energy storage converter: bidirectional DC-DC stages, ripple control, grid filters and how to specify them.
ISO 9001:2015 Certified
Manufacturer of Toroidal Inductors,
Ferrite Transformers & Magnetic Components.
© 2026 NG Electronics, Pune. All Rights Reserved.
These products are limited, checkout within
Smart configuration workspace setup.
