Instant Product Finder
Smart configuration workspace setup.
1Category
2Products
3Application
4Requirements
Our Product Range
Explore our range — click View Details, Add to Cart or Enquire Now on any product
8.4uH, 10.4Amps SMD Toroidal Power Inductor
10µH – 10mH
10A
Iron Powder / Ferrite
ABRACON Through Hole Toroidal Inductors INDUCTOR, 100UH, 2A, 20%, RADIAL, ATCA-01-101M-H
10µH – 10mH
25A
Iron Powder / Ferrite
Toroidal Power Inductors
NG Electronics is an ISO 9001:2015 certified toroidal power inductor manufacturer based in Pune, Maharashtra, supplying high current toroidal inductors, toroidal chokes and toroidal coils to OEMs, EMS partners and design houses across India. Every toroidal core inductor we ship is wound in-house, tested in-house and traceable to a batch record — nothing is outsourced and nothing is rebadged.
Our standard toroidal power inductor range covers 10µH to 10mH with current ratings up to 25A, wound on iron powder and ferrite toroidal cores. Because the magnetic flux stays contained inside the closed ring geometry, a toroidal coil radiates far less stray EMI than an equivalent bobbin or drum wound part — which is exactly why designers of SMPS, solar inverters, EV chargers and UPS systems specify toroidal inductors when board space is tight and EMC compliance is non-negotiable.
Whether you need 100 pieces of a catalogue part or a fully custom toroidal inductor built to your inductance, saturation current and temperature rise targets, our engineering team will work from your specification to a validated sample, typically within 7 to 10 working days.
Frequently Asked Questions
Find answers to common questions about our Toroidal Power Inductors
A toroidal power inductor stores energy in a magnetic field and smooths current in power conversion circuits. It is used for output filtering in SMPS, energy storage in boost and buck converters, EMI suppression in power lines, and current smoothing in solar inverters, UPS systems and EV chargers. The closed ring core keeps the magnetic flux contained, so it interferes far less with nearby components than open-core designs.
NG Electronics is an ISO 9001:2015 certified toroidal inductor manufacturer based in Pune with in-house winding, testing and design capability. We supply toroidal power inductors, toroidal chokes and custom toroidal magnetic components to OEMs across Maharashtra, Karnataka, Tamil Nadu, Gujarat, Telangana and the NCR, and we ship pan-India from our Pune facility.
Our standard toroidal power inductor range runs from 10µH to 10mH with current ratings up to 25A. On custom builds we go from 1µH up to 50mH and can wind for higher currents using heavier gauge or multi-strand copper. Tell us your saturation current requirement and we will size the core accordingly.
Electrically they are the same component; the name reflects the job. When the part is storing and releasing energy in a converter it is called a toroidal inductor. When it is blocking or attenuating unwanted high frequency current it is called a toroidal choke. Our toroidal power choke range is optimised for impedance across the noise band rather than pure energy storage.
Iron powder cores handle higher DC bias with a soft saturation curve and are cost effective, making them the usual choice for a DC power inductor in solar and UPS circuits. Ferrite cores have much lower core loss at high frequency, so they suit high efficiency power inductor duty above roughly 100kHz. Send us your operating frequency and DC bias and we will recommend the mix.
